2025 LiuGong Medium Wheel Loaders 856H-E MAX
- Year 2025
- Make LiuGong
- Model Medium Wheel Loaders
- Engine LFP
2025 LiuGong Medium Wheel Loaders 856H-E MAX
Engine
							Engine Manufacturer
							CATL
						
						
							Engine
							LFP
						
						
							Cooling
							Cooling method Intelligent temperature control, liquid cooling
						
						Motor
							Motor Power
							215 hp (160 kW)
						
						Drivetrain
							Transmission
							Planetary, power shift
						
						
							Steering
							Configuration Articulated
						
						
							Drivetrain
							Drive motors & hydraulic motors INOVANCE
						
						Brakes
							Brake System Type
							Service brake type Full hydraulic
						
						
							Maximum Pressure
							System pressure 3,626 psi (25 MPa) | Steering pressure 3,046 psi (21 MPa)
						
						
							Parking Brake
							Parking brake type Drum | Parking brake actuation Hydraulic cylinder brake
						
						Battery
							Battery
							2×12 V | Lithium iron phosphate batteries | Charging time (300 kW charging pile) =90 min (fast charging)
						
						
							Battery Capacity, Nominal
							Battery capacity at 20h rate 120 Ah
						
						Electric
							Electrical
							Rated storage energy 432 kWh | Nominal voltage 618 V | Voltage DC 24 V
						
						Wheels & Tires
							Tires, Front Specification
							23.5R2S L-3
						
						
							Tires, Rear Specification
							23.5R2S L-3
						
						Operational
							Operating Speed
							Max. travel speed, fwd 24.9 mph (40 km/h) | Max. travel speed, rev 8.1 mph (13 km/h)
						
						
							Operating Conditions
							Adaptive altitude =3.1 mi (5,000 m) | Cold cranking capacity at (-18o C) 850 A | Reserve capacity at (-44o F) 224 min | Bucket breakout force 36,419 lbf (162 kN)
						
						
							Operating Temperature, Maximum
							Ambient temperature -40-185°F (-40-85°C)
						
						Hydraulics
							Pump Type
							Main pump type Variable displacement pump
						
						
							Run Time Per Tankful
							Raise 5.2 s | Dump time 1.5 s | Float down time 2.3 s | Total cycle time 9.0 s
						
						Dimensions
							Height
							Maximum hinge pin height 13 ft 8 in (4,156 mm) | Dump clearance at full height discharge 9 ft 9 in (2,977 mm) | Dump reach at full height discharge 4 ft 0 in (1,231 mm) | Bucket rollback at max. height 56.3° | Cab: 11 ft 6 in (3,500 mm)
						
						
							Depth, Maximum
							Max. digging depth, bucket level 2 in (50.2 mm) | Max. dump angle at full height 45°
						
						
							Dimensions
							Bucket rollback at ground level 44.3° | 2 Bucket rollback at carry 49°  | Turn angle, either side 38° | Rear angle of departure 28°
						
						
							Ground Clearance
							1 ft 5 in (431 mm)
						
						
							Wheelbase
							11 ft 7 in (3,525 mm)
						
						
							Wheels
							tread 7 ft 6 in (2,280 mm)
						
						
							Width
							over tires 9 ft 5 in (2,880 mm) |  over bucket 9 ft 9 in (2,970 mm)
						
						
							Length
							with bucket down 28 ft 3 in (8,615 mm)
						
						
							Turning Radius
							bucket carry 23 ft 8 in (7,209 mm) | outside of tire 21 ft 9 in (6,625 mm)
						
						Capacities
							Features
							Bucket capacity range 3.53-7.32 yd³ (2.7-5.6 m³) | Transmission: 8 gal (30 L)
						
						
							Cooling System
							12 gal (45 L)
						
						
							Hydraulic Capacity
							61 gal (230 L)
						
						
							Axle Capacity, Front
							9 gal (35 L)
						
						
							Axle Capacity, Rear
							9 gal (35 L)
						
						
							Load Capacity, Land
							Tipping load - straight 38,360 lb (17,400 kg) | Tipping load - full turn 33,951 lb (15,400 kg)
						
						Weights
							Weight, In Running Order
							46,297 lb (21,000 kg)
						
						Features
							Features
							Controls Electric proportional fingertip control | Number of speeds, fwd 2 | Number of speeds, rev 1 | Front and rear axle reduction ratio 23.3 | Axle oscillation ±9°
						
					 
			