2025 LiuGong Large Wheel Loaders 890H

Current LiuGong Large Wheel Loaders Large Wheel Loaders

Swipe to View More

Year 2025
Make LiuGong
Model Large Wheel Loaders
Engine Model: QSG12

Shop LiuGong Pre-Owned

Product Details Specifications Photos

Year 2025
Manufacturer LiuGong
Model Name Large Wheel Loaders
Trim Name 890H
Generic Type (Primary) Large
Emissions Regulation: Tier 4 Final / Stage IV
Engine Manufacturer Cummins
Engine Model: QSG12
Engine Power Max gross: 370 hp (276 kW) @ 2,100 rpm | Max net: 352 hp (262 kW) @ 2,100 rpm
Engine Torque, Maximum Peak: 1,248 lb-ft (1,693 N-m) @ 1,400 rpm
Displacement 720 in3 (11.8 L)
Cylinder Liners 6
Aspiration Turbocharged & air-to-air intercooled

LOWER YOUR TOTAL COST OF OWNERSHIP

Environmental as well as economic awareness lie at the heart of our new 890H. Powered by the latest fuel efficient Cummins engine, it has a net power rating of 262 kW (351 hp) @ 1,800 rpm and fully complies with EPA Tier 4 final emission standards without compromising on power or performance.

Features may include:

Power Without Waste

Environmental as well as economic awareness lie at the heart of our new 890H. Powered by the latest fuel efficient Cummins engine, it has a net power rating of 262 kW (351 hp) @ 1,800 rpm and fully complies with EPA Tier IV final emission standards without compromising on power or performance. For operational efficiency, the engine uses a precise fuel injection system, turbo charger and air- to-air intercooler, along with electronic engine controls to deliver optimal performance in every cycle in every shift.

Control In The Operators Hands

We believe in making life easy on the operator which is why we've positioned the kick-down and forward/reverse buttons on the joystick. The kick-down function gives the operator finger-tip control enabling him to lower the gear, increase engine torque and maximize bucket breakout force with the minimum effort.

Easy Access Check Points

Easily accessible service points make daily checks fast and effective. Easily visible hydraulic oil level gauge, ground accessible filters, easy to reach electronic control box and easy to replace A/C filter.

Total Cost Of Ownership

The 890H’s value is critical to your business - heavyweight credibility and support are two key wheel loader purchasing criteria but ultimately, the machines earning potential, it's overall cost and its trade-in value really matter too.

Engine

Emissions Regulation: Tier 4 Final / Stage IV

Engine Manufacturer Cummins

Engine Model: QSG12

Engine Power Max gross: 370 hp (276 kW) @ 2,100 rpm | Max net: 352 hp (262 kW) @ 2,100 rpm

Engine Torque, Maximum Peak: 1,248 lb-ft (1,693 N-m) @ 1,400 rpm

Displacement 720 in3 (11.8 L)

Cylinder Liners 6

Aspiration Turbocharged & air-to-air intercooled

Drivetrain

Differential, Front Hydraulic lock

Differential, Rear Conventional

Steering Configuration: Articulated

Brakes

Brake System Type Type: Wet discs, two independent circuits | Actuation: Hydraulic

Parking Brake Type: Mechanical control | Actuation: Hydraulic

Wheels & Tires

Tires, Front Specification Width over tires: 10 ft 5 in (3,170 mm) | 29.5R25 L3 tire

Tires, Rear Specification Width over tires: 10 ft 5 in (3,170 mm) | 29.5R25 L3 tire

Operational

Operating Conditions Bucket breakout force: 55,078 lbf (245 kN)

Hydraulics

Maximum Pressure Steering pressure: 3,002 psi (20.7 MPa) | System pressure: 3,771 psi (26 MPa)

Pump Type Piston

Hydraulic Type Raise: 6.0 s | Dump time: 1.6 s | Float down time: 3.4 s | Total cycle time: 11.0 s

Dimensions

Dimensions Axle oscillation: ±11° | Bucket rollback at ground level: 45° | Bucket rollback at carry: 49° | Turn angle, either side: 38° | Rear angle of departure: 25°

Height Maximum hinge pin height: 15 ft 0 in (4,572 mm) | Dump clearance at full height discharge: 10 ft 11 in (3,330 mm) | Dump reach at full height discharge: 4 ft 10 in (1,479 mm) | Bucket rollback at maximum height: 62° | Maximum dump angle at full height: 45° | Cab height: 12 ft 4 in (3,765 mm)

Depth, Maximum Maximum digging depth, bucket level: 6 in (142 mm)

Ground Clearance 18 in (476 mm)

Wheelbase 12 ft 2 in (3,700 mm)

Wheels Wheel tread: 7 ft 11 in (2,420 mm)

Length With bucket down: 30 ft 8 in (9,352 mm)

Turning Radius bucket carry: 25 ft 4 in (7,725 mm)

Outside Turning Radius of tire: 23 ft 0 in (7,011 mm)

Width over bucket: 11 ft 4 in (3,440 mm)

Capacities

Cargo Capacity Bucket capacity: 7.1 yd3 (5.5 m3 )

Load Capacity, Land Tipping load - straight: 52,642 lb (23,878 kg) | Tipping load - full turn: 45,415 lb (20,600 kg)

Fuel Capacity Tank: 128.1 gal (485 L) | Transmission: 13.2 gal (50 L) | DEF tank: 13.2 gal (50 L)

Oil capacity 9.2 gal (35 L)

Cooling System 11.8 gal (45 L)

Hydraulic Capacity 67.3 gal (255 L)

Axle Capacity, Front Axles, each: 17.1 gal (65 L)

Axle Capacity, Rear Axles, each: 17.1 gal (65 L)

Weights

Weight, In Running Order Operating: 68,540 lb (31,089 kg)

2025 LiuGong Large Wheel Loaders 890H