2025 Barko Stationary Electric Loaders 95-SER-ERS

Information

2025 Barko Stationary Electric Loaders 95-SER-ERS

Barko's 95-SER-ERS stationary electric loader features a remote power unit. The 95-SER-ERS is an excellent solution for non-mobile applications in wood processing, scrap, waste/recycling, aggregates and other applications.

Features may include:

Power Sources
    • The 95-SER-ERS is available with a 50-HP (37 kW) open drip proof encapsulated electric motor, electrical enclosure with motor start circuit, and start/stop switches supplied for the control console.
Pedestal
    • The loader is mounted on a 27.5-inch-tall (699 mm) pedestal with 39-inch (991 mm) diameter bottom plate.
Load Sensing Hydraulics
    • Load sensing valves and pump deliver excellent metering by matching pressure and flow. Efficient and precise grapple functions reduce operator fatigue.
Joystick Controls
    • Ergonomically designed, multi-functional, dual electric-controlled joysticks are supplied for mounting into the operator station.
Boom Construction
    • Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.
Swing Torque
    • A high strength hydraulic motor and planetary gearbox produce 14,870 foot-pounds (20,161 Nm) of swing torque.
Zinc Plated Pins
    • Extra large zinc plated pins and bolts provide added durability in high-stress areas.
Boom Position Sensors
    • Position sensors monitor main boom and stick boom position location and can be used to limit range of motion, if necessary, to prevent the loader from contacting structures or other obstructions when working in tight spaces.
Bolt-On Cylinder Glands
    • Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.
Centralized Greasing
    • Single location greasing at the base of the loader makes it easy to grease typically hard-to-reach locations.
Customizable Control System
    • Combining electro-hydraulic valve controls with the Parker IQAN system, the loader controls can easily be configured to match the application or operator preferences for smooth and efficient operation that reduces operator fatigue.

Photos

Highlights

  • Elkins, West Virginia
  • 2025
  • Barko
  • Stationary Electric Loaders 95-SER-ERS
  • Available
  • Pedestal: 27.5” (69.9 cm)

Specifications

  • 2025
  • Barko
  • Stationary Electric Loaders
  • 95-SER-ERS
  • Stationary
  • 50 HP (37 kW) TEFC (Totally Enclosed Fan Cooled)
  • Motor: 480VAC 3-Phase 60Hz, circuit-protected 85A rated feeder
  • Swing System: Single stage planetary gearbox with hydraulic motor and gear lube reservoir for easy visual inspection and fill
  • Swing Performance: 8 rpm, 14,870 ft-lb (20,161 N-m) (100% Theoretical)
  • Axial Piston, load sensing
  • Efficient aluminum core with fan driven by 1/2 HP (0.37 kW) TEFC motor
  • (1) Spin-on main return, (1) Spin-on case drain
  • Swing Bearing: 27” (68.6 cm) outer diameter, external gear | Bottom Plate: 30” (76.2 cm) diameter, 1.5” (3.8 cm) thick | Bottom Holes: 1” nominal diameter bolt holes (24) on a 26” diameter bolt circle | Horizontal Reach: 22’ 4” (7.7 m) | Main Boom Cylinder: 5.0” (12.7 cm) Bore x 3.0” (7.6 cm) Rod | JiB Boom Hydraulic Cylinder: 5.0” (12.7 cm) Bore x 2.5” (6.4 cm) Rod
  • Pedestal: 27.5” (69.9 cm)
  • 68” (172.7 cm) | 43.0” (109.2 cm)
  • 45.0” (114.3 cm) | 36.0” (91.4 cm)
  • 25’2” (7.7 m), to boom pin center | 88.0” (223.5 cm)
  • Tank (reservoir): 45 Gal (170 L) with cleanout cover with optional pre-heater for cold climates
  • 5’ (1.5 m) Above Ground: 9889 lbs (4486 kg) @ 10ft (3.0 m) / 6947 lbs (3151 kg) @ 15ft (4.6 m) / 5510 lbs (2499 kg) @ 20ft (6.1 m) / 1810 lbs (821 kg) @ full reach
  • Curb: 4550 lbs (2064 kg) | Curb: 2200 lbs (998 kg)
  • Boom - Structure: All-welded construction with fabricated box type design; 2.5” (6.4 cm) pins with bronze bushings on main and jib pivots | Accumulator on main lift cylinder circuit to absorb shock loads | Guarding over hydraulic lines on jib boom